Call Us Now
TEL: +86 13386078659; Skype ID: Hanwei; WeChat: +8613386078659; QQ ID: 413882258.
Item No.:
HB-C3Payment:
CIF/FOBProduct origin:
ChinaColor:
WhiteShipping port:
ShangHaiLead Time:
28
1.1 Main functions of the equipment
Used for laminationand encapsulation curing of monocrystalline (polycrystalline) silicon solarcell modules.
1.2 Equipment technical specifications
Device model | HB-C3 |
Dimensions (L×W×H) (mm) | 2560×2560×1270 |
Laminated area (mm) | 2200×2200 |
Net weight of equipment (KG) | 4800 |
Laminated height (mm) | 25 |
Required pressure (MPa) | 0.6-1.0 |
Required cooling water flow (L/h) | 480 |
power supply | 3 phase 5lines 380VAC,50HZ(GND) |
Total power of equipment (KW) | 33 |
heating method: | Oil heating method, separate heating function and double heating function |
Temperature control method: | PID intelligent temperature control |
Temperature uniformity in working area: | ≤±1.5℃ |
Temperature control accuracy: | ≤±1℃ |
Temperature control range: | 30℃-180℃ |
Pumping rate: | 30 liters/sec, 70 liters/sec |
Laminating time: | 6-8 minutes (including curing time) |
Operating vacuum: | 200-20Pa |
Vacuum time: | 4-6 minute |
1.3 Equipment technical characteristics
1.3.1 Securityassurance:
1. Set up a safetypneumatic cylinder lock valve. When the equipment is accidentally powered offor the cover is opened in place, the upper cover will be automatically lockedin the current position and will not fall. Ensure the safety of operators.
2. Set the emergencybutton switch, press it in case of accident, the laminator will cut off theworking power, and the upper cover will remain in place. Ensure that theaccident is resolved and dealt with.
3. Alarm system: set thefuel tank shortage alarm, heating over temperature alarm, vacuum failure alarm,open lid under pressure alarm, vacuum pump failure alarm, heating failurealarm, temperature measurement module failure alarm, illegal operation failurealarm, a total of 8 sets Alarm device to ensure the accuracy and normal workingstatus and improve the yield.
4. Equipped with anemergency lid opening device, which can open the upper lid of the laminator,take out the components, and perform reprocessing in case of accidental powerfailure. It solves the helpless situation that the components cannot bedisposed of in time due to accidental power failure for a long time.
5. The equipment controlcircuit completely adopts low voltage control, which is convenient formaintenance personnel to maintain on-line and improve the safety factor.
1.3.2 Structural features:
1. The touch screencan be turned to the structure. Leading technology, generous appearance,compact structure and convenient operation.
2. The sealingrubber ring is placed on top to extend the service life.
3. The balancelifting structure of the power arm makes the opening and closing action of theupper chamber more stable and safe.
4. The anti-foldstructure of the rubber sheet extends the service life of the rubber sheet.
5. The structure ofthe heating platform is made of precision-machined thick steel plates. Theperforated oil circulation system inside the platform ensures the temperatureuniformity and controllability of the component packaging.
1.3.3 Applicationfeatures:
It can be laminatedand cured once, or laminated and cured three times. The equipment productioncomponents have strong compatibility.
1.3.4 Performancefeatures:
1. The intelligenttemperature control system makes the temperature more uniform and easier to setand control the temperature.
2. The laminationpressure can be adjusted, and the pressure can be adjusted according to theprocess, making the quality of the components better.
3. It can workcontinuously at high temperature for 24 hours.
4. The advancedtouch screen operation platform makes the operation more intuitive and easy tounderstand. The response is faster, the performance is more stable, and thefailure rate is further reduced.
5. Using acompletely humanized system operation process, the whole equipment is equippedwith multiple detection switches. In normal production work, the operator onlyneeds to put the components on the heating platform and press the cover switch.This equipment It will automatically laminate, cure, and automatically open thelid, waiting for the operator to proceed to the next process.
1.4 Main equipmentconfiguration table
1 | Control relay | Schneider |
|
2 | Temperature control module | Mitsubishi |
|
3 | Programmable Controllers | Mitsubishi |
|
4 | Pneumatic Components | AirTAC Taiwan |
|
5 | Vacuum pump | Sichuan Huaxin |
|
6 | touch screen | Taiwan Delta |
|